---
title: "Diving Behaviour Analysis in R"
package: diveMove
author: "Sebastián P. Luque"
date: "`r Sys.Date()`"
output:
  rmarkdown::html_vignette:
    toc: yes
    fig_caption: yes
bibliography: biblioSPL.bib
vignette: >
  %\VignetteIndexEntry{diveMove}
  %\VignetteEngine{knitr::rmarkdown}
  %\VignetteEncoding{UTF-8}
  %\usepackage[utf8]{inputenc}
---

```{r global-opts, include=FALSE}
knitr::opts_chunk$set(strip.white=TRUE, message=FALSE, warnings=FALSE,
                      size="small", out.width="100%")
library(pander)
```

This vignette is an updated version of the R News article in @7201.

Remarkable developments in technology for electronic data collection and
archival have increased researchers' ability to study the behaviour of
aquatic animals while reducing the effort involved and impact on study
animals.  For example, interest in the study of diving behaviour led to the
development of minute time-depth recorders (TDRs) that can collect more
than 15 MB of data on depth, velocity, light levels, and other parameters
as animals move through their habitat.  Consequently, extracting useful
information from TDRs has become a time-consuming and tedious task.
Therefore, there is an increasing need for efficient software to automate
these tasks, without compromising the freedom to control critical aspects
of the procedure.

There are currently several programs available for analyzing TDR data to
study diving behaviour.  The large volume of peer-reviewed literature based
on results from these programs attests to their usefulness.  However, none
of them are in the free software domain, to the best of my knowledge, with
all the disadvantages it entails.  Therefore, the main motivation for
writing **diveMove** was to provide an R package for diving behaviour
analysis allowing for more flexibility and access to intermediate
calculations.  The advantage of this approach is that researchers have all
the elements they need at their disposal to take the analyses beyond the
standard information returned by the program.

The purpose of this article is to outline the functionality of
**diveMove**, demonstrating its most useful features through an example of
a typical diving behaviour analysis session.  Further information can be
obtained by reading the vignette that is included in the package
(`vignette("diveMove")`) which is currently under development, but already
shows basic usage of its main functions.  **diveMove** is available from
CRAN, so it can easily be installed using `install.packages()`.

# Features

**diveMove** offers functions to perform the following tasks:

* Identification of wet vs. dry periods, defined by consecutive readings
  with or without depth measurements, respectively, lasting more than a
  user-defined threshold.  Depending on the sampling protocol programmed in
  the instrument, these correspond to wet vs. dry periods, respectively.
  Each period is individually identified for later retrieval.
* Calibration of depth readings, which is needed to correct for shifts in
  the pressure transducer.  This can be done using a `tcltk` graphical user
  interface (GUI) for chosen periods in the record, by providing a value
  determined a priori for shifting all depth readings, or by using an
  algorithmic method.
* Identification of individual dives, with their different phases (descent,
  bottom, and ascent), using various criteria provided by the user.  Again,
  each individual dive and dive phase is uniquely identified for future
  retrieval.
* Calibration of speed readings using the method described by @1929,
  providing a unique calibration for each animal and deployment.  Arguments
  are provided to control the calibration based on given criteria.
  Diagnostic plots can be produced to assess the quality of the
  calibration.
* Summary of time budgets for wet vs. dry periods.
* Dive statistics for each dive, including maximum depth, dive duration,
  bottom time, post-dive duration, and summaries for each dive phase, among
  other standard dive statistics.
* `plotly` plots to conveniently visualize the entire dive record, allowing
  for zooming and panning across the record.  Methods are provided to
  include the information obtained in the points above, allowing the user
  to quickly identify what part of the record is being displayed (period,
  dive, dive phase).

Additional features are included to aid in analysis of movement and
location data, which are often collected concurrently with TDR data.
They include calculation of distance and speed between successive
locations, and filtering of erroneous locations using various methods.
However, **diveMove** is primarily a diving behaviour analysis package, and
other packages are available which provide more extensive animal movement
analysis features (e.g. **trip**).

The tasks described above are possible thanks to the implementation of
three formal S4 classes to represent TDR data.  Classes `TDR` and
`TDRspeed` are used to represent data from TDRs with and without speed
sensor readings, respectively.  The latter class inherits from the former,
and other concurrent data can be included with either of these objects.  A
third formal class (`TDRcalibrate`) is used to represent data obtained
during the various intermediate steps described above.  This structure
greatly facilitates the retrieval of useful information during analyses.


# Preliminary Procedures

As with other packages in R, to use the package we load it with the funtion
`library`:

```{r setup, results="hide"}
library(diveMove)
```

This makes the objects in the package available in the current R session.
A short overview of the most important functions can be seen by running the
examples in the package's help page:

```r
example(diveMove)
```


## Data Preparation

TDR data are essentially a time-series of depth readings, possibly with
other concurrent parameters, typically taken regularly at a user-defined
interval.  Depending on the instrument and manufacturer, however, the files
obtained may contain various errors, such as repeated lines, missing
sampling intervals, and invalid data.  These errors are better dealt with
using tools other than R, such as `awk` and its variants, because such
stream editors use much less memory than R for this type of problems,
especially with the typically large files obtained from TDRs.  Therefore,
**diveMove** currently makes no attempt to fix these errors.  Validity
checks for the `TDR` classes, however, do test for time series being in
increasing order.

Most TDR manufacturers provide tools for downloading the data from their
TDRs, but often in a proprietary format.  Fortunately, some of these
manufacturers also offer software to convert the files from their
proprietary format into a portable format, such as comma-separated-values
(csv).  At least one of these formats can easily be understood by R, using
standard functions, such as `read.table()` or `read.csv()`.  **diveMove**
provides constructors for its two main formal classes to read data from
files in one of these formats, or from simple data frames.


# TDR Data Representation

`TDR` is the simplest class of objects used to represent TDR data in
**diveMove**.  This class, and its `TDRspeed` subclass, stores information
on the source file for the data, the sampling interval, the time and depth
readings, and an optional data frame containing additional parameters
measured concurrently.  The only difference between `TDR` and `TDRspeed`
objects is that the latter ensures the presence of a speed vector in the
data frame with concurrent measurements.  These classes have the following
slots:

* `file`: character,
* `dtime`: numeric,
* `time`: POSIXct,
* `depth`: numeric,
* `concurrentData`: data.frame

Once the TDR data files are free of errors and in a portable format, they
can be read into a data frame, using e.g.:

```{r dives-con}
fp <- file.path("data", "dives.csv")
sfp <- system.file(fp, package="diveMove")
```

```{r readin-csv}
srcfn <- basename(sfp)
tdrXcsv <- read.csv(sfp, sep=";")
```

and then put into one of the TDR classes using the function `createTDR()`.
Note, however, that this approach requires knowledge of the sampling
interval and making sure that the data for each slot are valid:

```{r create-tdr}
ddtt.str <- paste(tdrXcsv$date, tdrXcsv$time)
ddtt <- strptime(ddtt.str,
                 format="%d/%m/%Y %H:%M:%S")
time.posixct <- as.POSIXct(ddtt, tz="GMT")
tdrX <- createTDR(time=time.posixct,
                  depth=tdrXcsv$depth,
                  concurrentData=tdrXcsv[, -c(1:3)],
                  dtime=5, file=srcfn)
## Or a TDRspeed object, since we know we have
## speed measurements:
tdrX <- createTDR(time=time.posixct,
                  depth=tdrXcsv$depth,
                  concurrentData=tdrXcsv[, -c(1:3)],
                  dtime=5, file=srcfn,
                  speed=TRUE)
```

If the files are in \*.csv format, these steps can be automated using the
`readTDR()` function to create an object of one of the formal classes
representing TDR data (`TDRspeed` in this case), and immediately begin
using the methods provided:

```{r readin-tdr, eval=FALSE, results="hide"}
<<dives-con>>
tdrX <- readTDR(sfp, speed=TRUE, sep=";",
                na.strings="", as.is=TRUE)
plotTDR(tdrX)
```

```{r plot-tdr, echo=FALSE, eval.after="fig.cap", fig.cap=capt, fig.asp=1.3}
<<dives-con>>
tdrX <- readTDR(sfp, speed=TRUE, sep=";",
                na.strings="", as.is=TRUE)
capt <- paste("The `plotTDR()` method for *TDR* objects produces an",
              "interactive (disabled here to minimize vignette size)",
              "plot of the data, allowing for zooming and panning.")
knitr::include_graphics("figs/plot_tdr.png")
```

Several arguments for `readTDR()` allow mapping of data from the source
file to the different slots in **diveMove**'s classes, the time format in
the input and the time zone attribute to use for the time readings.

Various methods are available for displaying `TDR` objects, including
`show()`, which provides an informative summary of the data in the object,
extractors and replacement methods for all the slots.  There is a
`plotTDR()` method for both `TDR` and `TDRspeed` objects.  Information on
these methods is available via `methods?TDR`.

`TDR` objects can easily be coerced to data frame (`as.data.frame()`
method), without losing information from any of the slots.  `TDR` objects
can additionally be coerced to `TDRspeed`, whenever it makes sense to do
so, using an `as.TDRspeed()` method.


# Identification of Activities at Various Scales

One of the first steps of dive analysis is to identify dry and wet periods
in the record.  This is done with function `calibrateDepth()`.  Wet periods
are those with depth readings, dry periods are those without them.
However, records may have aberrant missing depth that should not define dry
periods, as they are usually of very short duration^[They may result from
animals resting at the surface of the water long enough to dry the
sensors.].  Likewise, there may be periods of wet activity that are too
short to be compared with other wet periods, and need to be excluded from
further analyses.  These aspects can be controlled by setting the arguments
`dry.thr` and `wet.thr` to appropriate values.

The next step involves correcting depth for shifts in the pressure
transducer, so that surface readings correspond to zero.  Such shifts are
usually constant for an entire deployment period, but there are cases where
the shifts vary within a particular deployment, so shifts remain difficult
to detect and dives are often missed.  Therefore, a visual examination of
the data is often the only way to detect the location and magnitude of the
shifts.  Visual adjustment for shifts in depth readings is tedious, but has
many advantages which may save time during later stages of analysis.  These
advantages include increased understanding of the data, and early detection
of obvious problems in the records, such as instrument malfunction during
certain intervals, which should be excluded from analysis.

Function `calibrateDepth()` takes a *TDR* object to perform three basic
tasks:

1. identify wet and dry periods,
2. zero-offset correct (ZOC) the data, and
3. identify all dives in the record and their phases.

ZOC can be done using one of three methods: `visual`, `offset`, and
`filter`.  The `visual` method lets the user perform the correction
interactively, using the **tcltk** package:

```{r eval=FALSE}
dcalib <- calibrateDepth(tdrX, zoc.method="visual")
```

This command brings up a plot with **tcltk** controls allowing to zoom in
and out, as well as pan across the data, and adjust the depth scale.  Thus,
an appropriate time window with a unique surface depth value can be
displayed.  This allows the user to select a depth scale that is small
enough to resolve the surface value using the mouse.  Clicking on the ZOC
button waits for two clicks:

1. the coordinates of the first click define the starting time for the
   window to be ZOC'ed, and the depth corresponding to the surface,
2. the second click defines the end time for the window (i.e. only the x
   coordinate has any meaning).

This procedure can be repeated as many times as needed.  If there is any
overlap between time windows, then the last one prevails.  However, if the
offset is known a priori, method `offset` lets the user specify this value
as the argument `offset` to `calibrateDepth()`.  For example, preliminary
inspection of object `tdrX` would have revealed a 3 m offset, and we could
have simply called (without plotting):

```{r eval=FALSE}
dcalib <- calibrateDepth(tdrX,
                         zoc.method="offset",
                         offset=3)
```

The third method (`filter`) is the default, and implements a
smoothing/filtering mechanism where running quantiles can be applied to
depth measurements sequentially, using `.depth.filter`.  This method
usually yields adequate results by applying two filters, the first one
being a running median with a narrow window to denoise the time series,
followed by a running low quantile using a wide time window.  The integer
vector given as argument `k` specifies the width of the moving window(s),
where $k_{i}$ is the width for the $i^{th}$ filter in units of the sampling
interval of the `TDR` object.  Similarly, the integer vector given as
argument `probs` specifies the quantile for each filter, where $probs_{i}$
is the quantile for the $i^{th}$ filter.  Smoothing/filtering can be
performed within specified minimum and maximum depth bounds using argument
`depth.bounds`^[Defaults to the depth range], in cases where surface
durations are relatively brief separated by long periods of deep diving.
These cases usually require large windows, and using depth bounds helps to
stabilize the surface signal.  Further details on this method are provided
by @8642.

```{r eval=FALSE}
dcalib <- calibrateDepth(tdrX,
                         zoc.method="filter",
                         k=c(3, 5760),
                         probs=c(0.5, 0.02),
                         na.rm=TRUE)
```

Once the whole record has been zero-offset corrected, remaining depths
below zero, are set to zero, as these are assumed to indicate values at the
surface.

Finally, `calibrateDepth()` identifies all dives in the record, according
to a minimum depth criterion given as its `dive.thr` argument.  The value
for this criterion is typically determined by the resolution of the
instrument and the level of noise close to the surface.  Thus, dives are
defined as departures from the surface to maximal depths below `dive.thr`
and the subsequent return to the surface.  Each dive may subsequently be
referred to by an integer number indicating its position in the time
series.

Dive phases are also identified at this last stage, and is done by fitting
one of two cubic spline models to each dive:

1. unimodal regression (default)
2. smoothing spline

and then using evaluating the first derivative to determine where phases
begin/end.  Detection of dive phases is thus controlled by four arguments:
a critical quantile for rates of vertical descent (`descent.crit.q`), a
critical quantile for rates of ascent (`ascent.crit.q`), a smoothing
parameter (`smooth.par`, relevant only for smoothing spline model (1)), and
a factor (`knot.factor`) that multiplies the duration of the dive to obtain
the number of knots at which to evaluate the derivative of the smoothing
spline.  The first two arguments are used to define the rate of descent
below which the descent phase is deemed to have ended, and the rate of
ascent above which the ascent phase is deemed to have started,
respectively.  The rates are obtained by evaluating the derivative of the
spline at a number of knots placed regularly throughout the dive.  Descent
is deemed to have ended at the *first* minimum derivative, and the nearest
input time observation is considered to indicate the end of descent.  The
sign of the comparisons is reversed for detecting the ascent.

A more refined call to `calibrateDepth()` for object `tdrX` may be:

```{r zoc}
dcalib <- calibrateDepth(tdrX, dive.thr=3,
                         zoc.method="offset",
                         offset=3,
                         descent.crit.q=0.01,
                         ascent.crit.q=0,
                         knot.factor=20)
```

The result (value) of this function is an object of class `TDRcalibrate`,
where all the information obtained during the tasks described above are
stored.


# Calibrated TDR Data Representation

Objects of class `TDRcalibrate` contain the following slots, which store
information during the major procedures performed by
`calibrateDepth()`:

* [`call`:]  The call used to generate the object.
* [`tdr`: `TDR`]  The object which was calibrated.
* [`gross.activity`: `list`] This list contains four components with
  details on wet/dry activities detected, such as start and end times,
  durations, and identifiers and labels for each activity period.  Five
  activity categories are used for labelling each reading, indicating dry
  (L), wet (W), underwater (U), diving (D), and brief wet (Z) periods.
  However, underwater and diving periods are collapsed into wet activity at
  this stage (see below).
* [`dive.activity`: `data.frame`] This data frame contains three components
  with details on the diving activities detected, such as numeric vectors
  identifiying to which dive and post-dive interval each reading belongs
  to, and a factor labelling the activity each reading represents.
  Compared to the `gross.activity` slot, the underwater and diving periods
  are discerned here.
* [`dive.phases`: `factor`] This identifies each reading with a particular
  dive phase.  Thus, each reading belongs to one of descent,
  descent/bottom, bottom, bottom/ascent, and ascent phases.  The
  descent/bottom and bottom/ascent levels are useful for readings which
  could not unambiguously be assigned to one of the other levels.
* [`dive.models`: `list`]  This list contains all the details of
  the modelling process used to identifies dive phases.  Each member of
  this list consists of objects of class *diveModel*, for which
  important methods are available.
* [`dry.thr`: `numeric`]
* [`wet.thr`: `numeric`]
* [`dive.thr`: `numeric`] These last three slots store information given as
  arguments to `calibrateDepth()`, documenting criteria used during
  calibration.
* [`speed.calib.coefs`: `numeric`] If the object calibrated was of class
  *TDRspeed*, then this is a vector of length 2, with the intercept and the
  slope of the speed calibration line (see below).

All the information contained in each of these slots is easily accessible
through extractor methods for objects of this class (see
`class?TDRcalibrate`).  An appropriate `show()` method is available to
display a short summary of such objects, including the number of dry and
wet periods identified, and the number of dives detected.

The `TDRcalibrate` `plotTDR()` method for these objects allows visualizing
the major wet/dry activities throughout the record:

```{r plot-tdrcalibrate, eval=FALSE}
plotTDR(dcalib, concurVars=c("speed", "light"), surface=TRUE)
```

```{r, echo=FALSE, eval.after="fig.cap", fig.cap=capt, out.height="180%"}
capt <- paste("The `plotTDR()` method for *TDRcalibrate* objects produces",
              "an interactive (disabled here to minimize vignette size)",
              "plot displaying information on the major activities",
              "identified throughout the record",
              "(wet/dry periods in this case).")
knitr::include_graphics("figs/plot_tdrcalib_01.png", dpi=NA)
```

The `dcalib` object contains a *TDRspeed* object in its `tdr` slot, and
speed is plotted by default in this case.  Additional measurements obtained
concurrently can also be plotted using the `concurVars` argument.  Titles
for the depth axis and the concurrent parameters use separate arguments;
the former uses `ylab.depth`, while the latter uses `concurVarTitles`.
Convenient default values for these are provided.  The `surface` argument
controls whether post-dive readings should be plotted; it is `FALSE` by
default, causing only dive readings to be plotted which saves time plotting
and re-plotting the data.  All plot methods use the underlying `plotTD()`
function, which has other useful arguments that can be passed from these
methods.

A more detailed view of the record can be obtained by using a combination
of the `diveNo` and the `labels` arguments to this `plotTDR()` method.
This is useful if, for instance, closer inspection of certain dives is
needed.  The following call displays a plot of dives 2 through 8:

```{r plot-dive-activity, eval=FALSE}
plotTDR(dcalib, diveNo=2:8, what="phases", depth.lim=c(0, 80))
```

```{r, echo=FALSE, eval.after="fig.cap", fig.cap=capt}
capt <- paste("The `plotTDR()` method for *TDRcalibrate* objects can also",
              "display information on the different activities identified",
              "during each dive (descent=D, descent/bottom=DB,",
              "bottom/ascent=BA, ascent=A, X=surface).")
knitr::include_graphics("figs/plot_tdrcalib_02.png")
```

The `labels` argument allows the visualization of the identified dive
phases for all dives selected.  The same information can also be obtained
with the `extractDive()` method for *TDRcalibrate* objects:

```{r extract-dive, eval=FALSE}
extractDive(dcalib, diveNo=2:8)
```

Other useful extractors include: `getGAct()` and `getDAct()`.  These
methods extract the whole `gross.activity` and `dive.activity`,
respectively, if given only the `TDRcalibrate` object, or a particular
component of these slots, if supplied a string with the name of the
component.  For example: `getGAct(dcalib, "activity")` would retrieve the
factor identifying each reading with a wet/dry activity and
`getDAct(dcalib, "dive.activity")` would retrieve a more detailed factor
with information on whether the reading belongs to a dive or a brief
aquatic period.  Below is a demonstration of these methods.

`getTDR()`: This method simply takes the *TDRcalibrate* object as its
single argument and extracts the *TDR* object^[In fact, a *TDRspeed* object
in this example]:

```{r tdr-extract}
getTDR(dcalib)
```

`getGAct()`: There are two methods for this generic, allowing access to a
list with details about all wet/dry periods found.  One of these extracts
the entire *list* (output omitted for brevity):

```{r grossact1, eval=FALSE}
getGAct(dcalib)
```

The other provides access to particular elements of the *list*, by
their name.  For example, if we are interested in extracting only the
vector that tells us to which period number every row in the record belongs
to, we would issue the command:

```{r grossact2, eval=FALSE}
getGAct(dcalib, "phase.id")
```

Other elements that can be extracted are named `activity`, `begin`, and
`end`, and can be extracted in a similar fashion.  These elements
correspond to the activity performed for each reading (see `?detPhase` for
a description of the labels for each activity), the beginning and ending
time for each period, respectively.

`getDAct()`: This generic also has two methods; one to extract an entire
data frame with details about all dive and postdive periods found (output
omitted):

```{r diveact-1, eval=FALSE}
getDAct(dcalib)
```

The other method provides access to the columns of this data frame, which
are named `dive.id`, `dive.activity`, and `postdive.id`.  Thus, providing
any one of these strings to getDAct, as a second argument will extract the
corresponding column.

`getDPhaseLab()`: This generic function extracts a factor identifying each
row of the record to a particular dive phase (see `?detDive` for a
description of the labels of the factor identifying each dive phase).  Two
methods are available; one to extract the entire factor, and the other to
select particular dive(s), by its (their) index number, respectively
(output omitted):

```{r dphaselab1, eval=FALSE}
getDPhaseLab(dcalib)
getDPhaseLab(dcalib, 20)
```

```{r dphaselab2}
dphases <- getDPhaseLab(dcalib, c(100:300))
```

The latter method is useful for visually inspecting the assignment of
points to particular dive phases.  More information about the dive phase
identification procedure can be gleaned by using the
`plotDiveModel`:

```{r, echo=FALSE}
capt <- paste("Details of the process of identification of dive phases",
              "shown by `plotDiveModel`, which has methods for objects",
              "of class *TDRcalibrate* and *diveModel*.")
```

```{r diveModel, fig.cap=capt, fig.width=5, fig.height=5, out.width=NULL}
plotDiveModel(dcalib, diveNo=260)
```

Another generic function that allows the subsetting of the original
*TDR* object to a single a dive or group of dives' data:

```{r extractdive}
sealX <- extractDive(dcalib, diveNo=c(100:300))
sealX
```

As can be seen, the function `extractDive` takes a *TDRcalibrate* object
and a vector indicating the dive numbers to extract, and returns a *TDR*
object containing the subsetted data.  Once a subset of data has been
selected, it is possible to plot them and pass the factor labelling dive
phases as the argument `phaseCol` to the `plot` method^[The function that
the method uses is actually `plotTD`, so all the possible arguments can be
studied by reading the help page for `plotTD`]:

```{r plot-phases, eval=FALSE}
plotTDR(sealX, phaseCol=dphases)
```

With the information obtained during this calibration procedure, it is
possible to calculate dive statistics for each dive in the record.


# Dive Summaries

A table providing summary statistics for each dive can be obtained with the
function `diveStats()`.

```{r dive-summaries, results="asis"}
tdrXSumm1 <- head(diveStats(dcalib), 2)
cap <- "Per-dive summaries can be obtained with function `diveStats()`."
pander(tdrXSumm1, digits=2, caption=cap)
```

```{r time-budget, results="asis"}
tbudget <- head(timeBudget(dcalib, ignoreZ=TRUE), 5)
cap <- "Time budget summary can be calculated with function `timeBudget()`."
pander(tbudget, digits=2, caption=cap)
```

`diveStats()` returns a data frame with the final summaries for each dive,
providing the following information:

* The time of start of the dive, the end of descent, and the time when
  ascent began.
* The total duration of the dive, and that of the descent, bottom, and
  ascent phases.
* The vertical distance covered during the descent, the bottom (a measure
  of the level of "wiggling", i.e. up and down movement performed during
  the bottom phase), and the vertical distance covered during the ascent.
* The maximum depth attained.
* The duration of the post-dive interval.

A summary of time budgets of wet vs. dry periods can be obtained with
`timeBudget()`, which returns a data frame with the beginning and ending
times for each consecutive period.  It takes a *TDRcalibrate* object and
another argument (`ignoreZ`) controlling whether aquatic periods that were
briefer than the user-specified threshold^[This corresponds to the value
given as the `wet.thr` argument to `calibrateDepth()`.] should be collapsed
within the enclosing period of dry activity.

These summaries are the primary goal of **diveMove**, but they form the
basis from which more elaborate and customized analyses are possible,
depending on the particular research problem.  These include investigation
of descent/ascent rates based on the depth profiles, and bout structure
analysis, which can also be done in **diveMove**.

In the particular case of *TDRspeed* objects, however, it may be necessary
to calibrate the speed readings before calculating these statistics.


# Calibrating Speed Sensor Readings

Calibration of speed sensor readings is performed using the procedure
described by @1929.  Briefly the method rests on the principle that for any
given rate of depth change, the lowest measured speeds correspond to the
steepest descent angles, i.e. vertical descent/ascent.  In this case,
measured speed and rate of depth change are expected to be equal.
Therefore, a line drawn through the bottom edge of the distribution of
observations in a plot of measured speed vs. rate of depth change would
provide a calibration line.  The calibrated speeds, therefore, can be
calculated by reverse estimation of rate of depth change from the
regression line.

**diveMove** implements this procedure with function `calibrateSpeed()`.
This function performs the following tasks:

* Subset the necessary data from the record.  By default only data
  corresponding to depth changes~$>$~0 are included in the analysis, but
  higher constraints can be imposed using the `z` argument.  A further
  argument limiting the data to be used for calibration is `bad`, which is
  a vector with the minimum *rate* of depth change and minimum speed
  readings to include in the calibration.  By default, values~$>$~0 for
  both parameters are used.
* Calculate the binned bivariate kernel density and extract the desired
  contour.  Once the proper data were obtained, a bivariate normal kernel
  density grid is calculated from the relationship between measured speed
  and rate of depth change (using the **KernSmooth** package).  The choice
  of bandwidths for the binned kernel density is made using `bw.nrd`.  The
  `contour.level` argument to `calibrateSpeed()` controls which particular
  contour should be extracted from the density grid.  Since the interest is
  in defining a regression line passing through the lower densities of the
  grid, this value should be relatively low (it is set to 0.1 by default).
* Define the regression line passing through the lower edge of the chosen
  contour.  A quantile regression through a chosen quantile is used for
  this purpose.  The quantile can be specified using the `tau` argument,
  which is passed to the `rq()` function in package *quantreg*.  `tau` is
  set to 0.1 by default.
* Finally, the speed readings in the *TDR* object are calibrated.

As recognized by @1929, the advantage of this method is that it calibrates
the instrument based on the particular deployment conditions (i.e. controls
for effects of position of the instrument on the animal, and size and shape
of the instrument, relative to the animal's morphometry, among others).
However, it is possible to supply the coefficients of this regression if
they were estimated separately; for instance, from an experiment.  The
argument `coefs` can be used for this purpose, which is then assumed to
contain the intercept and the slope of the line.  `calibrateSpeed()`
returns a *TDRcalibrate* object, with calibrated speed readings included in
its `tdr` slot, and the coefficients used for calibration.

For instance, to calibrate speed readings using the 0.1 quantile regression
of measured speed vs. rate of depth change, based on the 0.1 contour of the
bivariate kernel densities, and including only changes in depth~$>$~1,
measured speeds and rates of depth change~$>$~0:

```{r, echo=FALSE}
capt <- paste("The relationship between measured speed and rate of depth",
              "change can be used to calibrate speed readings.",
              "The line defining the calibration for speed measurements",
              "passes through the bottom edge of a chosen contour,",
              "extracted from a bivariate kernel density grid.")
```

```{r calibrate-speed, fig.cap=capt, fig.width=5, fig.height=5, out.width=NULL}
vcalib <- calibrateSpeed(dcalib, tau=0.1,
                         contour.level=0.1,
                         z=1, bad=c(0, 0),
                         cex.pts=0.2)
```

This call produces the plot shown above, which can be suppressed by the use
of the logical argument `plot`.  Calibrating speed readings allows for the
meaningful interpretation of further parameters calculated by
`diveStats()`, whenever a *TDRspeed* object was found in the *TDRcalibrate*
object:

* The total distance travelled, mean speed, and diving angle during the
  descent and ascent phases of the dive.
* The total distance travelled and mean speed during the bottom phase of
  the dive, and the post-dive interval.


# Bout Detection

Diving behaviour often occurs in bouts for several species, so **diveMove**
implements procedures for defining bout ending criteria [@7116; @7397].
Please see `?bouts2.mle` and `?bouts2.nls` for examples of 2-process
models.


# Summary

The **diveMove** package provides tools for analyzing diving behaviour,
including convenient methods for the visualization of the typically large
amounts of data collected by `TDR`s.  The package's main strengths are its
ability to:

* identify wet vs.~dry periods,
* calibrate depth readings,
* identify individual dives and their phases,
* summarize time budgets,
* calibrate speed sensor readings,
* provide basic summaries for each dive identified in *TDR* records, and
* provide tools for identification of dive bout end criteria.

Formal `S4` classes are supplied to efficiently store `TDR` data and
results from intermediate analysis, making the retrieval of intermediate
results readily available for customized analysis.  Development of the
package is ongoing, and feedback, bug reports, or other comments from users
are very welcome.


# Acknowledgements

Many of the ideas implemented in this package developed over fruitful
discussions with my mentors John P.Y.~Arnould, Christophe Guinet, and
Edward H.~Miller.  I would like to thank Laurent Dubroca who wrote draft
code for some of **diveMove**'s functions.  I am also greatly endebted to
the regular contributors to the R-help newsgroup who helped me solve many
problems during development.


# References
