---
title: "rvar: The Random Variable Datatype"
author: "Matthew Kay"
date: "`r Sys.Date()`"
output: 
  html_vignette:
    toc: yes
vignette: >
  %\VignetteIndexEntry{rvar: The Random Variable Datatype}
  %\VignetteEngine{knitr::rmarkdown}
  %\VignetteEncoding{UTF-8}
---

## Introduction

This vignette describes the `rvar()` datatype, a multidimensional, sample-based
representation of random variables designed to act as much like base R arrays
as possible (e.g., by supporting many math operators and functions). This format
is also the basis of the `draws_rvars()` format.

The `rvar()` datatype is inspired by the [rv](https://cran.r-project.org/package=rv)
package and [Kerman and Gelman (2007)](https://doi.org/10.1007%2Fs11222-007-9020-4),
though with a slightly different backing format (multidimensional arrays). It is
also designed to interoperate with vectorized distributions in the
[distributional](https://pkg.mitchelloharawild.com/distributional/) package,
to be able to be used inside `data.frame()`s and `tibble()`s, and to be used
with distribution visualizations in the [ggdist](https://mjskay.github.io/ggdist/) package.

```{r setup, include = FALSE}
library(posterior)

set.seed(1234)
```

## The `rvars` datatype

The `rvar()` datatype is a wrapper around a multidimensional array where the
first dimension is the number of draws in the random variable. The most direct
way to create a random variable is to pass such an array to the `rvar()` function.

For example, to create a "scalar" `rvar`, one would pass a one-dimensional array
or a vector whose length (here `4000`) is the desired number of draws:

```{r x_rvar_rnorm}
x <- rvar(rnorm(4000, mean = 1, sd = 1))
x
```

The default display of an `rvar` shows the mean and standard deviation of
each element of the array.

We can create random vectors by adding an additional dimension beyond just the
draws dimension to the input array:

```{r x_rvar_array}
n <- 4   # length of output vector
x <- rvar(array(rnorm(4000*n, mean = 1, sd = 1), dim = c(4000, n)))
x
```

Or we can create a random matrix:

```{r x_matrix}
rows <- 4
cols <- 3
x <- rvar(array(rnorm(4000 * rows * cols, mean = 1, sd = 1), dim = c(4000, rows, cols)))
x
```

Or any array up to an arbitrary number of dimensions. The array backing an `rvar`
can be accessed (and modified, with caution) via `draws_of()`:

```{r str_draws}
str(draws_of(x))
```

While the above examples assume all draws come from a single chain, `rvar`s
can also contain samples from multiple chains. For example, if your array of
draws has iterations as the first dimension and chains as the second dimension,
you can use `with_chains = TRUE` to create an `rvar` that includes chain
information:

```{r x_matrix_with_chains}
iterations <- 1000
chains <- 4
rows <- 4
cols <- 3
x_array <- array(
  rnorm(iterations * chains * rows * cols, mean = 1, sd = 1),
  dim = c(iterations, chains, rows, cols)
)
x <- rvar(x_array, with_chains = TRUE)
x
```

Manual construction and modification of `rvar`s in this way is not always recommended
unless you need it for performance reasons: several other higher-level interfaces
to constructing and manipulating `rvar`s are described below.

### `rvar_factor` and `rvar_ordered` subtypes {#rvar_factor}

You can also use `rvar`s to represent discrete distributions, using the `rvar_factor()`
and `rvar_ordered()` subtypes. If you attempt to create an `rvar` using character
values or a `factor`, it will automatically be treated as an `rvar_factor`:

```{r rvar_factor}
x <- rvar(sample(c("a","b","c"), 4000, prob = c(0.7, 0.2, 0.1), replace = TRUE))
x
```

Numeric arrays with a `"levels"` attribute can also be passed to `rvar_factor()`.
This (along with conversion of character values) means output from 
`rstanarm::posterior_predict()` and `brms::posterior_predict()` on categorical
models can be passed directly to `rvar_factor()`.

The default display shows the mode (as returned by `modal_category()`) and
normalized entropy (`entropy()`), which is Shannon entropy scaled by the maximum
possible entropy for a distribution with the same number of levels: thus 0
means all probability is concentrated in one category, and 1 means the distribution
is uniform.

You can construct an ordered factor using `rvar_ordered()` (or by passing an
`ordered()` vector to `rvar()`):

```{r rvar_ordered}
x <- rvar_ordered(sample(c("a","b","c"), 4000, prob = c(0.7, 0.2, 0.1), replace = TRUE))
x
```

For `rvar_ordered()`, the default display is mode and dissention (`dissent()`),
which is 0 when all probability is concentrated in one category, and 1 when
the distribution is bimodal at opposite ends of the scale.

`rvar_factor`s attempt to mimic `factor()` and `rvar_ordered`s attempt to mimic
`ordered()`s, by implementing factor-specific functions like `levels()`. Comparison
operations are also implemented where valid. For example, in `x` as defined above, 
approximately 90% of draws should be less than `"b"` (which means the `"a"` and
`"b"` levels):

```{r x_lte_b}
x <= "b"
```

`rvar`s also supply an implementation of `match()` and `%in%`, which can be
especially useful with `rvar_factor`s:

```{r x_in_ac}
x %in% c("a", "c")
```

## The `draws_rvars` datatype

The `draws_rvars()` datatype, like all `draws` datatypes in posterior, contains
multiple variables in a joint sample from some distribution (e.g. a posterior or 
prior distribution).

You can construct `draws_rvars()` objects directly using the `draws_rvars()`
function. The input `rvar`s must have the same number of chains and iterations,
but can otherwise have different shapes:

```{r draws_rvars}
d <- draws_rvars(x = x, y = rvar(rnorm(iterations * chains), nchains = 4))
d
```

Existing objects can also be converted to the `draws_rvars()` format
using `as_draws_rvars()`. Below is the `example_draws("multi_normal")` dataset
converted into the `draws_rvars()` format. This dataset has 100 iterations from 
4 chains from the posterior of a a 3-dimensional multivariate normal model. The 
`mu` variable is a mean vector of length 3 and the `Sigma` variable is a $3 \times 3$
covariance matrix:

```{r post}
post <- as_draws_rvars(example_draws("multi_normal"))
post
```

The `draws_rvars()` datatype works much the same way that other `draws` formats
do; see the main package vignette at `vignette("posterior")` for an introduction 
to `draws` objects. One difference is that `draws_rvars` counts variables
differently, because it allows variables to be multidimensional. For example,
the `post` object above contains two variables, `mu` and `Sigma`:

```{r variables_draws_rvars}
variables(post)
```

But converted to a `draws_list()`, it contains one variable for each
combination of the dimensions of its variables:

```{r variables_draws_list}
variables(as_draws_list(post))
```

## Math with `rvar`s

The `rvar()` datatype implements most math operations, including basic arithmetic,
functions in the *Math* and *Summary* groups, like `log()` and `exp()` (see 
`help("groupGeneric")` for a list), and more. Binary operators can be performed
between multiple `rvar`s or between `rvar`s and `numeric`s. A simple example:

```{r mu_plus_1}
mu <- post$mu
Sigma <- post$Sigma

mu + 1
```

Matrix multiplication is also implemented (using a tensor product under the hood).
In R < 4.3, the normal matrix multiplication operator (`%*%`) cannot be properly
implemented for S3 datatypes, so `rvar` uses `%**%` instead. In R ≥ 4.3, which 
does support matrix multiplication for S3 datatypes, you can use `%*%` to 
matrix-multiply `rvar`s.

A trivial example:

```{r matrix_mult}
Sigma %**% diag(1:3)
```

The set of mathematical functions and operators supported by `rvar`s
includes:

| Group                       | Functions and operators |
|:----------------------------|:------------------------|
| Arithmetic operators        | `+`, `-`, `*`, `/`, `^`, `%%`, `%/%` |
| Logical operators           | `&`, `|`, `!` |
| Comparison operators        | `==`, `!=`, `<`, `<=`, `>=`, `>` |
| Value matching              | `match()`, `%in%` |
| Matrix multiplication       | `%**%`, `%*%` (R ≥ 4.3 only) |
| Basic functions             | `abs()`, `sign()`<br>`sqrt()`<br>`floor()`, `ceiling()`, `trunc()`, `round()`, `signif()` |
| Logarithms and exponentials | `exp()`, `expm1()`<br>`log()`, `log10()`, `log2()`, `log1p()` |
| Trigonometric functions     | `cos()`, `sin()`, `tan()`<br>`cospi()`, `sinpi()`, `tanpi()`<br>`acos()`, `asin()`, `atan()`|
| Hyperbolic functions        | `cosh()`, `sinh()`, `tanh()`<br>`acosh()`, `asinh()`, `atanh()` |
| Special functions           | `lgamma()`, `gamma()`, `digamma()`, `trigamma()` |
| Cumulative functions        | `cumsum()`, `cumprod()`, `cummax()`, `cummin()` |
| Array transposition         | `t()`, `aperm()` |
| Matrix decomposition        | `chol()` |
| Matrix diagonals            | `diag()` |

## Expectations and summary functions

The `E()` function is an alias of `mean()`, producing means
within each cell of an `rvar`. For example, given `mu`:

```{r mu}
mu
```

We can get the expectation of each cell of `mu`:

```{r E_mu}
E(mu)
```

Expectations of logical expressions are probabilities, and can be computed either
with `E()` / `mean()` or with `Pr()`. `Pr()` is provided as notational sugar, but
also checks that the input is a logical variable before taking the mean:

```{r Pr}
Pr(mu > 0)
```

More generally, the `rvar` data type provides two types of summary functions: 

1. Summary functions that mimic base-R vector summary functions, except applied to `rvar` vectors. These apply their summaries **over** elements of the input vectors **within** each draw, generally returning an `rvar` of length 1. These functions are prefixed with `rvar_` as a reminder that they return `rvar`s. Here is an example of `rvar_mean()`:
  
    ```{r rvar_mean_mu}
    rvar_mean(mu)
    ```

2. Summary functions that summarise **within** elements of input vectors and **over** draws. These summary functions generally return base arrays (`numeric` or `logical`) of the same shape as the input `rvar`, and are especially useful for diagnostic summaries. These summary functions are not prefixed with `rvar_` as they do not return `rvar`s. Here is an example of `mean()`:

    ```{r mean_mu}
    mean(mu)
    ```

   You should expect the same values from these functions (though in a different shape) when you use them with `summarise_draws()`, for example:

    ```{r summarise_draws_mu_mean}
    summarise_draws(mu, mean)
    ```

Here is a table of both types of summary functions:

|                          | 1. Summarise *within* draws,<br>*over* elements | 2. Summarise *over* draws,<br>*within* elements<br> |
|--------------------------|:------------------------------------------------|:----------------------------------------------------|
| **Output format**<br>of `res = f(x)` | `rvar` of length 1 | `array` of same shape as input `rvar` |
| **Help page**            | `help("rvar-summaries-within-draws")` | `help("rvar-summaries-over-draws")` |
| Numeric summaries        | `rvar_median()`<br>`rvar_sum()`, `rvar_prod()`<br>`rvar_min()`, `rvar_max()`| `median()`<br>`sum()`, `prod()`<br>`min()`, `max()`|
| Mean                     | `rvar_mean()`<br>*N/A* | `mean()`, `E()`<br>`Pr()`: enforces that input is `logical` |
| Spread                   | `rvar_sd()` <br>`rvar_var()` <br> `rvar_mad()` | `sd()`<br>`var()`, `variance()`<br> `mad()`|
| Range                    | `rvar_range()`<br>**Note:** `length(res) == 2` | `range()`<br>**Note:** `dim(res) == c(2, dim(x))` |
| Quantiles                | `rvar_quantile()`<br>**Note:** `length(res) == length(probs)` | `quantile()`<br>**Note:** `dim(res) == c(length(probs), dim(x))` |
| Logical summaries        | `rvar_all()`, `rvar_any()` | `all()`, `any()` |
| Special value predicates | `rvar_is_finite()`<br>`rvar_is_infinite()`<br>`rvar_is_nan()`<br>`rvar_is_na()`<br>**Note:** `dim(res) == dim(x)`. These functions act within draws but do not summarise over elements.        | `is.finite()`<br>`is.infinite()`<br>`is.nan()`<br>`is.na()`<br>**Note:** `res[i] == TRUE` if `x[i]` has any draws matching predicate (except for `is.finite()`, where all draws in `x[i]` must match) |
| Diagnostics              | *N/A* | `ess_basic()`, `ess_bulk()`, `ess_quantile()`, `ess_sd()`, `ess_tail()`,<br>`mcse_mean()`, `mcse_quantile()`, `mcse_sd()`<br>`rhat()`, `rhat_basic()`|

## Constants

Constant `rvar`s can be constructed by converting numeric vectors or arrays into `rvar`s
using `as_rvar()`, which will return an `rvar` with one draw and the same dimensions as its
input:

```{r const}
const <- as_rvar(1:3)
const
```

While normally `rvar`s must have the same number of draws to be used in the
same expression, `rvar`s with one draw are treated like constants, and 
can be combined with other `rvar`s:

```{r mu_plus_const}
mu + const
```

## Using existing R functions and expressions with `rvar`s

While `rvar`s attempt to emulate as much of the functionality of base R arrays
as possible, there are situations in which an existing R function may not 
work directly with an `rvar`. There are several approaches to solving this
problem.

For example, say you wish to generate samples from the
following expression for $\mu$, $\sigma$, and $x$:

$$
\begin{align}
\left[\begin{matrix}\mu_1 \\ \vdots \\ \mu_4 \end{matrix}\right] &\sim \textrm{Normal}\left(\left[\begin{matrix}1 \\ \vdots \\ 4 \end{matrix}\right],1\right)\\
\sigma &\sim \textrm{Gamma}(1,1)\\
\left[\begin{matrix}x_1 \\ \vdots \\ x_4 \end{matrix}\right] &\sim \textrm{Normal}\left(\left[\begin{matrix}\mu_1 \\ \vdots \\ \mu_4 \end{matrix}\right], \sigma\right)
\end{align}
$$

There are three different approaches you might take to doing this: converting
existing R functions with `rfun()`, executing expressions of
random variables with `rdo()`, or evaluating random number generator functions
using `rvar_rng()`.

### Converting functions with `rfun()`

The `rfun()` wrapper converts an existing R function into a new function 
that `rvar`s can be passed to it as arguments, and which
will return `rvar`s. 
We can use `rfun()` to convert the base `rnorm()` and `rgamma()` 
random number generating functions into functions that accept and return `rvar`s:

```{r rfun_defs}
rvar_norm <- rfun(rnorm)
rvar_gamma <- rfun(rgamma)
```

Then we can translate the above example into code using those functions:

```{r rfun_ex}
mu <- rvar_norm(4, mean = 1:4, sd = 1)
sigma <- rvar_gamma(1, shape = 1, rate = 1)
x <- rvar_norm(4, mu, sigma)
x
```

While `rfun()`-converted functions work well for prototyping, they will generally
speaking be slower than functions designed specifically for `rvar`s. Thus, you
may find you need to adopt other strategies (like `rvar_rng()`, described below;
or re-writing functions to support `rvar` directly using math operators and/or the
`draws_of()` function).

### Evaluating expressions with `rdo()`

An alternative to `rfun()` is to use `rdo()`, which can be passed nearly-arbitrary
R expressions. The expression will be executed
multiple times to construct an `rvar`. E.g., we can write an expression for
`mu` like in the above example:

```{r mu_rdo}
mu <- rdo(rnorm(4, mean = 1:4, sd = 1))
mu
```

We can also control the number of draws using the `ndraws` argument:

```{r mu_rdo_ndraws}
mu <- rdo(rnorm(4, mean = 1:4, sd = 1), ndraws = 1000)
mu
```

`rdo()` expressions can also contain other `rvar`s, so long as all `rvar`s in
the expression have the same number of draws. Thus, we can re-write the
example above that used `rfun()` as follows:

```{r rdo_ex}
mu <- rdo(rnorm(4, mean = 1:4, sd = 1))
sigma <- rdo(rgamma(1, shape = 1, rate = 1))
x <- rdo(rnorm(4, mu, sigma))
x
```

Like `rfun()`, `rdo()` is not necessarily fast, so you may find it more useful
for prototyping than production code.

### Evaluating random number generators with `rvar_rng()`

`rvar_rng()` is an alternative to `rfun()`/`rdo()` designed specifically to work
with random number generating functions that follow the typical API of such
functions in base R. Such functions, like `rnorm()`, `rgamma()`, `rbinom()`, etc 
all following this interface:

- They have a first argument, `n`, giving the number of draws to take from the distribution.
- Their arguments for distribution parameters (`mean`, `sd`, `shape`, `rate`, etc.) are vectorized.
- They return a single vector of length `n`, representing `n` draws from the distribution.

You can use any function with this interface with `rvar_rng()`, and it will adapt
it to be able to take `rvar` arguments and return an `rvar`, as follows:

```{r rvar_r_ex}
mu <- rvar_rng(rnorm, 4, mean = 1:4, sd = 1)
sigma <- rvar_rng(rgamma, 1, shape = 1, rate = 1)
x <- rvar_rng(rnorm, 4, mu, sigma)
x
```

In contrast to the `rfun()` and `rdo()` examples above, `rvar_rng()` takes 
advantage of the existing vectorization of the underlying random number generating
function to execute quickly.

## Broadcasting

Broadcasting for `rvar`s does not follow R's vector recycling rules. Instead,
when two variables with different dimensions are being used with basic arithmetic
functions, dimensions are added until both variables have the same number of dimensions.
If two variables $x$ and $y$ differ on the length of dimension $d$, they can
be broadcast to the same size so long as one of the variables has dimension $d$
of size 1. Then that variable will be broadcast up to the same size as the
other variable along that dimension. If two variables disagree on the size of 
a dimension and neither has size 1, it is an error.

For example, consider this random matrix:

```{r X_matrix}
X <- rdo(rnorm(12, 1:12), dim = c(4,3))
X
```

And this vector of length 3:

```{r y_vector}
y <- rdo(rnorm(3, 3:1))
y
```

If we attempt to add `X` and `y`, it will produce an error as vectors are 
by default treated as column vectors, and `y` has length 3 while columns of 
`X` have length 4:

```{r X_plus_y, error = TRUE}
X + y
```

By contrast, R arrays of the same shape will simply recycle `y` until it is the
same length as `X` (regardless of the dimensions). Thus will produce a result,
though likely not the intended result:

```{r mean_X_plus_y}
mean(X) + mean(y)
```

On the other hand, if y were a row vector...

```{r row_y}
row_y = t(y)
row_y
```

...it would have the same number of
columns as `X` and contain only one row, so it can be broadcast along rows of `X`:

```{r X_plus_row_y}
X + row_y
```

## Slicing and conditionals

The `[[` and `[` operators implement all of the base array slicing operations, 
including numeric, character, and logical indices, as well as slicing arrays
using a matrix of indices with `[`. The main difference between `rvar` slicing
and base array slicing is that `rvar`s default to `drop = FALSE`; i.e. they
retain all dimensions of the original `rvar` array. For a complete list of 
`rvar` slicing types, see `help("rvar-slice")`.

In addition to the base slicing operations, `rvar` also implements three
slicing/conditioning methods that allow you to use other `rvar`s to define
a slice. 

To demonstrate these operations, consider an `rvar` vector of two components:

```{r}
component = rvar_rng(rnorm, 2, mean = c(1, 5))
component
```

Perhaps we want to create a mixture of these two components, `mixture`, with a
mixing proportion of 0.75. We could create an index, `i`, that is a random
variable indicating which component (1 or 2) determines the value of `mixture`
on each draw:

```{r}
i = rvar_rng(rbinom, 1, size = 1, p = 0.75) + 1L
i
```

We can use several different approaches to create the mixture distribution

### Subsetting `rvar`s by draw: `x[<logical rvar>]`

A slice `x[i]` where `i` is a scalar logical `rvar` returns a new rvar with the same
shape as `x`, but containing only those draws where `i` is `TRUE`. Thus,
we can use `i == 2` to select draws from the second component and overwrite
them in the first component, creating the mixture distribution:

```{r}
mixture = component[[1]]
mixture[i == 2] = component[[2]][i == 2]
mixture
```

The resulting mixture looks like this:

```{r mixture, eval = requireNamespace("ggplot2", quietly = TRUE) && requireNamespace("ggdist", quietly = TRUE)}
library(ggplot2)

ggplot() + ggdist::stat_slab(aes(xdist = mixture))
```

See `vignette("slabinterval", package = "ggdist")` for more examples of 
visualizing distribution-type objects, including `rvar`s.

### Conditionals using `rvar_ifelse()`

You could create the same mixture using `rvar_ifelse(test, yes, no)`, which 
broadcasts `test`, `yes`, and `no` to the same shape, then returns a new
`rvar` containing draws from `yes` where `test == TRUE` and draws from `no`
where `test == FALSE`.

Thus, we can create the mixture as follows:

```{r}
x = rvar_ifelse(i == 1, component[[1]], component[[2]])
x
```

### Selecting different elements in each draw: `x[[<numeric rvar>]]`

The slice `x[[i]]`, where `i` is a scalar numeric rvar, generalizes indexing when 
`i` is a scalar numeric. Within each draw of `x`, it selects the element of `x`
corresponding to the value of `i` within that same draw.

Thus, since `i` in our example is a scalar numeric `rvar` whose values are 
either `1` or `2` within each draw, you can use it as an index directly on 
`component` to create the mixture:

```{r}
x = component[[i]]
x
```

This approach is also nice because it generalizes easily to more than two components.

## Applying functions over `rvar`s

The `rvar` data type supplies an implementation of `as.list()`, which should give 
compatibility with the base R family of functions for applying functions over arrays:
`apply()`, `lapply()`, `vapply()`, `sapply()`, etc. You can also manually use
`as.list()` to convert an `rvar` into a list along its first dimension, which
may be necessary for compatibility with some functions (like `purrr:map()`).

For example, given this multidimensional `rvar`...

```{r multidim_array}
set.seed(3456)
x <- rvar_rng(rnorm, 24, mean = 1:24)
dim(x) <- c(2,3,4)
x
```

... you can apply functions along the margins using `apply()` (here, a silly example):

```{r apply}
apply(x, c(1,2), length)
```

One exception is that while `apply()` will work with an `rvar` input if your function
returns base data types (like numerics), it will not give you simplified `rvar`
arrays if your function returns an `rvar`. Thus, we supply the `rvar_apply()`
function, which takes in either base arrays or `rvar` arrays and returns `rvar`
arrays, and which also uses the `rvar` broadcasting rules to combine the
results of the applied function.

For example, you can use `rvar_apply()` with `rvar_mean()` to compute the distributions of
means along one margin of an array:

```{r rvar_apply_one_dim}
rvar_apply(x, 1, rvar_mean)
```

Or along multiple dimensions:

```{r rvar_apply_multi_dim}
rvar_apply(x, c(2,3), rvar_mean)
```

## Looping over `draws` and `rvar`s

The `rvar` datatype is also used in `for_each_draw()`, which allows you to loop
over draws in a `draws` object or an `rvar`. `for_each_draw(x, expr)` converts `x`
into a `draws_rvars()` object, then loops over each draw of `x`, executing the
provided expression, `expr`. The expression can use the variables in `x` as if
they were regular R arrays.

One application of `for_each_draw()` is in constructing base-R plots of individual
draws (for `ggplot2`-based plotting of `rvar`s, see the next section and the
[ggdist](https://mjskay.github.io/ggdist/) package). For example, it can be used
to construct a parallel coordinates plot:

```{r eight_schools_parcoord, fig.width = 6, fig.height = 4}
eight_schools <- as_draws_rvars(example_draws())

plot(1, type = "n",
  xlim = c(1, length(eight_schools$theta)),
  ylim = range(range(eight_schools$theta)),
  xlab = "school", ylab = "theta"
)

# use for_each_draw() to make a parallel coordinates plot of all draws
# of eight_schools$theta
for_each_draw(eight_schools, {
  lines(seq_along(theta), theta, col = rgb(1, 0, 0, 0.05))
})

# add means and 90% intervals
lines(seq_along(eight_schools$theta), mean(eight_schools$theta))
with(summarise_draws(eight_schools$theta), 
  segments(seq_along(eight_schools$theta), y0 = q5, y1 = q95)
)
```

As `for_each_draw()` will be slower than most other ways of manipulating draws, 
this function should generally not be used unless needed.


## Using `rvar`s in data frames and in ggplot2

`rvar`s can be used as columns in `data.frame()` or `tibble()` objects:

```{r data_frame_with_y}
df <- data.frame(group = c("a","b","c","d"), mu)
df
```

This makes them convenient for adding predictions to a data frame alongside
the data used to generate the predictions. `rvar`s can then be visualized with ggplot2
by passing them to the `xdist` and `ydist` aesthetics of the `stat_...` family of
geometries in the [ggdist](https://mjskay.github.io/ggdist/) package, 
such as `stat_halfeye()`, `stat_lineribbon()`, and `stat_dotsinterval()`.
For example:

```{r data_frame_plot, eval = requireNamespace("ggplot2", quietly = TRUE) && requireNamespace("ggdist", quietly = TRUE)}
library(ggplot2)
library(ggdist)

ggplot(df) +
  stat_halfeye(aes(y = group, xdist = mu))
```

See `vignette("slabinterval", package = "ggdist")` or 
`vignette("tidy-posterior", package = "tidybayes")` for more examples.
